File:Titanium.steel.jpg

From processdesign
Revision as of 05:45, 22 February 2016 by Hassanali (talk | contribs) (Comparison of titanium and stainless steel brackets stress strain curves. A load is applied to each metal (load is below failure limit of each material), the yield strength of both metals is exceeded and the load is released.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Original file ‎(1,280 × 1,133 pixels, file size: 152 KB, MIME type: image/jpeg)

Comparison of titanium and stainless steel brackets stress strain curves. A load is applied to each metal (load is below failure limit of each material), the yield strength of both metals is exceeded and the load is released.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current05:45, 22 February 2016Thumbnail for version as of 05:45, 22 February 20161,280 × 1,133 (152 KB)Hassanali (talk | contribs)Comparison of titanium and stainless steel brackets stress strain curves. A load is applied to each metal (load is below failure limit of each material), the yield strength of both metals is exceeded and the load is released.

You cannot overwrite this file.

There are no pages that use this file.

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "https://design.cbe.cornell.edu/index.php?title=File:Titanium.steel.jpg&oldid=4859"